Template for Determining the Corner Radius

Determine display corner radii

Measuring the length and width of a display or touchscreen is usually not a problem. But how can the corner radius of the required anti-reflective or crystal clear protective film or of the OnScreen Hybrid Glass determined? With the help of our Print template for determining corner radii Can you very easily determine the corner radii of the display to be protected. We have in Download Area We have provided this print template with rounded corners for you. You will also find a small guide with it. If you have any questions, please feel free to contact us. contact.

How can I determine the radius of my display?

We usually use radius gauges internally and for measuring corner radii at the customer's site. If these are not available, you can Neoxum Corner Radius Print Template used. To do this, follow these steps:

1. Download the corner radius pressure template from our website:
   Download Now!
2. Using the printed corner radii, select the closest matching corner radius and cut them out with sharp scissors along the black contour line.
3. IMPORTANT: The corner radius does not need to be accurate to 1/100. Sometimes, it's enough to be able to distinguish between 5 mm and 6 mm. When in doubt Our service staff will be happy to help you..
4. If you are not satisfied with the determined radius, please simply try the next larger or next smaller corner radius and cut it out again along the black contour line.
5. If your device display has different corner radii, please determine the corner radii for each corner or each side using Neoxum's printable corner gauge (as a rule, the corner radii of the upper side are symmetrical to the left and right; the same generally applies to the corner radii of the lower side of the display).